This video will walk you through what it's like to visit a Sparks Fitness Showroom and take you through a home delivery from start to finish.LEARN MORE
Link/Omega Series: 2” x 4” and 1-1/2” x 3” 11 gauge (.120 wall) structural steel tube with 3/8” and 1/4” thick steel plate. Mounting plates with rubber feet protect floor and prevent the machine from sliding. Fusion/FZ Series: 1-3/4" x 4" flat oval tube with 3/8" and 1/4" thick steel plate. Frame tubes are bent with the use of an inside mandrel or cut and mig welded to ensure maximum structural integrity.
Abrasive blasted and/or chemically treated frames are electrostatically powder coated ensuring
maximum adhesion and durability.
Sealed bearings and oil impregnated bronze bushings operate on solid shafts to ensure a smooth movement and tight fit
Laser cut from 3/8” steel plate and offer starting point adjustment on applicable machines.
Precision machined solid steel weight plates with individual bushings travel on solid, chromed, guide rods to ensure ultra smooth operation. Heavy rubber suspension bumpers are used to absorb and reduce shock.
3/16” thick powder coated steel diamond plate to avoid slipping.
Glass reinforced nylon operating on precision steel ball bearings.
Nylon coated, lubricated, mil. spec. cable. 2000 lb. tensile strength. Pivoting cable ends with oil-impregnated bronze bushings promote long cable life.
Contoured pads with lumbar support make a comfortable and well supported workout. Pads are double stitched and handcrafted from the finest materials available.
Adjustable seats are gas assisted and all telescoping pad adjustments use nylon sleeves to make Batca seat adjustments smooth and effortless.
Formed and powder coated steel weight stack guard is standard.
Ergonomically molded handgrips provide a comfortable, and non-absorbing grip.
What is Covered:
For Residential Use:
Batca Fitness Systems warrants all of its products against defects in manufacturing, materials and workmanship under normal use and service for one year from date of purchase including paint, chrome, upholstery and grips. Batca Fitness Systems also warrants all cables, belts, bolts, nuts, caps, plugs, bumpers, washers, levelers, decals, gas springs and other hardware for three years after date of purchase; all moving parts, including pulleys, bushings, bearings and pull pins for five years after date of purchase and warrants the frame and all welded parts for the lifetime of the original purchaser.
For Commercial Use:
Batca Fitness Systems warrants all of its products against defects in manufacturing, materials and workmanship under normal use and service for six months from date of purchase including paint, chrome, upholstery and grips. Batca Fitness Systems also warrants all cables, belts, bolts, nuts, caps, plugs, bumpers, washers, levelers, decals, gas springs and other hardware for one year after date of purchase; all moving parts, including pulleys, bushings, bearings and pull pins for three years after date of purchase and warrants the frame and all welded parts for ten years after date of purchase.
What is not covered:
This warranty does not cover damage, which results from shipping, misuse, abuse, neglect, carelessness, modification or alteration, accident, fire, flood, “acts of God” or other contingencies beyond the control of Batca Fitness Systems. This warranty also does not cover deterioration from wear and tear or exposure or any defect, which would not have happened if instructions in the owner’s manual had been followed. Improper installation, improper assembly or follow-up maintenance along with installation of parts or accessories not originally intended for products of Batca Fitness Systems are also not covered by this warranty. Only genuine Batca parts should be used for replacement, repair, and maintenance for this warranty to apply.
Defective parts will be repaired or replaced at Batca Fitness Systems option, without parts charge to the purchaser. All returns require a return authorization prior to acceptance of repair work. Batca Fitness Systems reserves the right to make design changes without any prior notification and shall not be responsible for incidental or consequential damages.
The purchaser is responsible for shipping the defective part back to the factory. Repair or replacement is the exclusive and sole remedy of the purchaser. Labor charges associated with parts changeovers are not covered by this warranty. Proof of purchase, serial number, model number and date of purchase will be required along with all pertinent information of the alleged damage.
This warranty applies only to the original purchaser and is not transferable. Claims under this warranty must be made directly to Batca Fitness Systems.
The Fusion 3 provides more exercises and functionality in less space. Experience the perfect blend of machine-defined, user-defined, and dumbbell exercises.
2 Multi-Hook Strap Handles,
Multi-Use Short Bar, Ankle Strap,
Two Hook Lat Bar
200 lb. Weight Stack
Leg Press Features 2:1 Weight Ratio (400 lbs of Actual Resistance)
Height: 6' 11"
Base Unit - 727 lb
Leg Press - 210 lbs